1" Brown Richlite Cutting Board

$0.82

Thickness: 1"
Color: Light Brown
Size: These boards can be cut to the exact size you need. Note for example: If the short side is 10 1/2" and the long side is 16", you will select "10" as the "short side", then "1/2" as the "short side fraction". Then choose "16" as the "long side" and "0/16" as the "long side fraction".
Edges and Corners: "Standard" edges and corners mean your board will be squared off. "Rounded/Bullnosed" means your board will be slightly rounded

Why should you use Richlite?

Richlite is the BEST cutting board material available!
Withstands heat up to 350 degrees, so bring on the pots and pans!
Attractive finish that resembles wood grain
Much harder surface than wood
Scratch Resistant
Stain Resistant
Designed to stay beautiful for years
Solid color all the way through, so if minor scratching does occur there is no difference in color
Highly Sanitary and NSF Approved
Impervious surface that keeps bacteria at bay
Easy to clean and maintain
No dyes added during manufacturing

Caring for your Richlite Cutting Board

A quick wipe up with a damp sponge on a regular basis will maintain the beauty of the surface
Murphy's Oil Soap can also be applied undiluted for regular maintenance
Howard's Naturals Wood Cleaner and Polish will slightly renew the luster when used regularly
Alkaline soaps such as regular dish soap will gradually dull the surface
To remove stubborn stains, use a nonabrasive household cleaner
Plain yogurt can be used to pull stains from light colored Richlite
DO NOT use bleach products or abrasive cleaners

Full Description

Short Side *

Short Side Fraction

Long Side *

Long Side Fraction

Edge *

Corner *

Juice Groove *

Quantity

Thickness: 1"
Color: Light Brown
Size: These boards can be cut to the exact size you need. Note for example: If the short side is 10 1/2" and the long side is 16", you will select "10" as the "short side", then "1/2" as the "short side fraction". Then choose "16" as the "long side" and "0/16" as the "long side fraction".
Edges and Corners: "Standard" edges and corners mean your board will be squared off. "Rounded/Bullnosed" means your board will be slightly rounded

Why should you use Richlite?

Richlite is the BEST cutting board material available!
Withstands heat up to 350 degrees, so bring on the pots and pans!
Attractive finish that resembles wood grain
Much harder surface than wood
Scratch Resistant
Stain Resistant
Designed to stay beautiful for years
Solid color all the way through, so if minor scratching does occur there is no difference in color
Highly Sanitary and NSF Approved
Impervious surface that keeps bacteria at bay
Easy to clean and maintain
No dyes added during manufacturing

Caring for your Richlite Cutting Board

A quick wipe up with a damp sponge on a regular basis will maintain the beauty of the surface
Murphy's Oil Soap can also be applied undiluted for regular maintenance
Howard's Naturals Wood Cleaner and Polish will slightly renew the luster when used regularly
Alkaline soaps such as regular dish soap will gradually dull the surface
To remove stubborn stains, use a nonabrasive household cleaner
Plain yogurt can be used to pull stains from light colored Richlite
DO NOT use bleach products or abrasive cleaners

Availability: In Stock

Current Stock:

Shipping Cost: Calculated at Checkout

MPN: HRCB1

SKU: HRCB1-SS

Warranty: We provide a lifetime guarantee against defects in the material. Please note this does not apply to wear and tear or normal use of the product. Please measure accurately, as many of our boards are custom manufactured to the exact size YOU need. Our custom manufactured products are non-returnable unless there is a defect in the material. Be safe, measure twice! If you are not happy with your non-custom manufactured product you can return it within 30 days for a refund. Please note the product must be in new condition and a return authorization number is required prior to returning the product.Our parts are not necessarily purchased direct from the OEM (original equipment manufacturer). Often we purchase direct from the OES (original equipment supplier) so our parts are equal or greater in quality than parts provided with the original equipment.